-- *****************************************************************************
-- Juniper-V35-MIB
--
-- Juniper Networks Enterprise MIB
--   X.21/V.35 Server MIB
--
-- Copyright (c) 2002 Unisphere Networks, Inc.
-- Copyright (c) 2002, 2003 Juniper Networks, Inc.
--   All Rights Reserved.
-- *****************************************************************************

Juniper-V35-MIB  DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    InterfaceIndex
        FROM IF-MIB
    juniMibs
        FROM Juniper-MIBs;

juniV35MIB  MODULE-IDENTITY
    LAST-UPDATED "200209162144Z"  -- 16-Sep-02 05:44 PM EDT
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
        "       Juniper Networks, Inc.
        Postal: 10 Technology Park Drive
                Westford, MA  01886-3146
                USA
        Tel:    +1 978 589 5800
        Email:  mib@Juniper.net"
    DESCRIPTION
        "The X.21/V.35 Server MIB for the Juniper Networks enterprise."
    -- Revision History
    REVISION    "200209162144Z"  -- 16-Sep-02 05:44 PM EDT  - JUNOSe 5.0
    DESCRIPTION
        "Replaced Unisphere names with Juniper names."
    REVISION    "200202081625Z"  -- 08-Feb-02 11:25 AM EST  - JUNOSe 4.0
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { juniMibs 59 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniV35Objects     OBJECT IDENTIFIER ::= { juniV35MIB 1 }

-- /////////////////////////////////////////////////////////////////////////////
--
-- X.21/V.35 Interfaces
--
-- /////////////////////////////////////////////////////////////////////////////
--
-- The X.21/V.35 Interface Table
--
juniV35IfTable  OBJECT-TYPE
    SYNTAX      SEQUENCE OF JuniV35IfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table contains entries for X.21/V.35 interfaces present in the
        system.  This table provides an extension to the
        Juniper-HDLC-MIB.juniHdlcIfTable for HDLC interfaces that support
        X.21/V.35 signalling."
    ::= { juniV35Objects 2 }

juniV35IfEntry  OBJECT-TYPE
    SYNTAX      JuniV35IfEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "Each entry describes the characteristics of an X.21/V.35 interface."
    INDEX     { juniV35IfIndex }
    ::= { juniV35IfTable 1 }

JuniV35IfEntry ::= SEQUENCE {
    juniV35IfIndex           InterfaceIndex,
    juniV35IfType            INTEGER,
    juniV35IfMode            INTEGER,
    juniV35IfClockRate       Unsigned32,
    juniV35IfNrzEncoding     INTEGER,
    juniV35IfTxClock         INTEGER,
    juniV35IfIgnoreDcd       INTEGER,
    juniV35IfLoopback        INTEGER }

juniV35IfIndex  OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The ifIndex of the X.21/V.35 interface.  It has the same value as the
        juniHdlcIfIndex for the common interface."
    ::= { juniV35IfEntry 1 }

juniV35IfType  OBJECT-TYPE
    SYNTAX      INTEGER {
                    x21(0),
                    v35(1),
                    interfaceTypeNoCable(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Read only parameter of interface type X.21/V.35."
    ::= {juniV35IfEntry 2}

juniV35IfMode  OBJECT-TYPE
    SYNTAX      INTEGER {
                    dte(0),
                    dce(1),
                    interfaceModeNoCable(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
        "Read only parameter of interface mode of interface X.21/V.35 Data
        Terminating Equipment(DTE)/Data Communication Equipment(DCE)."
    ::= { juniV35IfEntry 3 }

juniV35IfClockRate  OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "hertz"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The clock rate setting in hertz for this X.21/V.35 interface.  Only the
        following values are valid: 1200, 2400, 4800, 9600, 19200, 38400, 56000,
        64000, 128000, 1024000, 1536000, 2048000, 3072000, 4096000, 4915200,
        6144000, and 8192000.  If a value other than one of the predefined
        values is set, then the closest matching value is used.

        The clock rate parameter is only meaningful when the interface is in DCE
        mode.  When the interface is in DTE mode, the value is simply ignored."
    DEFVAL    { 2048000 }
    ::= { juniV35IfEntry 4 }

juniV35IfNrzEncoding  OBJECT-TYPE
    SYNTAX      INTEGER {
                    normal(0),
                    inverted(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The non-return-to-zero (NRZ) encoding for X.21/V.35 interface.
        Inverted encoding is provided with NRZI-encoding command, which is
        non-return-to-zero inverted (NRZI) encoding."
    DEFVAL    { normal }
    ::= { juniV35IfEntry 5 }

juniV35IfTxClock  OBJECT-TYPE
    SYNTAX      INTEGER {
                    normal(0),
                    inverted(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "There is an option of inverting the transmit clock signal for X.21/V.35
        interface.  Inverting the tranmit clock is used to compensate for skews
        between the clock and data when transmitting across long cables at fast
        data rates."
    DEFVAL    { normal }
    ::= { juniV35IfEntry 6 }

juniV35IfIgnoreDcd  OBJECT-TYPE
    SYNTAX      INTEGER {
                    ignoredNone(0),
                    dcdIgnored(1),
                    linkStateIgnored(2) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "When in X.21/V.35 DTE mode we have the capability of ignoring the DCD
        signal in determining whether or not an interface is up."
    DEFVAL    { ignoredNone }
    ::= { juniV35IfEntry 7 }

juniV35IfLoopback  OBJECT-TYPE
    SYNTAX      INTEGER {
                    none(0),
                    loopback(1) }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Loopback interface is configured (or not) for X.21/V.35 interface"
    DEFVAL    { none }
    ::= { juniV35IfEntry 8 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB.  Placeholders follow.
-- juniV35TrapControl OBJECT IDENTIFIER ::= { juniV35MIB 2 }
-- juniV35Traps            OBJECT IDENTIFIER ::= { juniV35MIB 3 }
-- juniV35TrapPrefix       OBJECT IDENTIFIER ::= { juniV35Traps 0 }


-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
juniV35Conformance OBJECT IDENTIFIER ::= { juniV35MIB 4 }
juniV35Compliances OBJECT IDENTIFIER ::= { juniV35Conformance 1 }
juniV35Groups      OBJECT IDENTIFIER ::= { juniV35Conformance 2 }

--
-- compliance statements
--
juniV35Compliance  MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for entities that implement the Juniper
        X.21/V.35 MIB."
    MODULE   -- this module
        MANDATORY-GROUPS {
            juniV35Group }
    ::= { juniV35Compliances 1 }                                   -- JUNOSe 4.0


--
-- units of conformance
--
juniV35Group  OBJECT-GROUP
    OBJECTS {
        juniV35IfType,
        juniV35IfMode,
        juniV35IfClockRate,
        juniV35IfNrzEncoding,
        juniV35IfTxClock,
        juniV35IfIgnoreDcd,
        juniV35IfLoopback }
    STATUS      current
    DESCRIPTION
        "A collection of objects providing management of X.21/V.35 interfaces in
        a Juniper product."
    ::= { juniV35Groups 1 }

END